Eurotherm
Invensys
.

Ultra SlimPak G-Series

DC Voltage or Current

G108
  • G108 DC Input Limit Alarm Ultra SlimPak®
  • G408 DC Input Field Configurable Isolator

Strain-Gauge

G448
  • G448 Bridge Input Field Configurable Signal Conditioner

AC Voltage or Current

G468
  • G468 AC Input Field Configurable Isolator
  • G168 AC Input Field Configurable Limit Alarm

RTD

G118
  • G418 RTD Input Field Configurable Isolator
  • G118 RTD Input Field Configurable Limit Alarm

Potentiometer

G438
  • G438 Potentiometer Input, Field Configurable Signal Conditioner

24 Volt DC Power Supplies

H910
  • H910 24VDC, 1.0A DIN-Rail Mount Power Supplies
  • H915 24VDC, 2.3A DIN-Rail Mount Power Supplies

Thermocouple

G128
  • G428 Thermocouple Input Field Configurable Isolator
  • G128 Thermocouple Input Field Configurable Limit Alarm

Frequency

G478
  • G478 Frequency Input, Field Configurable Isolator

Input Selection

Typical Application

Description

Model

DC Voltage or Current
(V, mV, A, mA)

Voltage/current scaling, isolation, noise reduction and signal drive

DC Input Field Configurable Isolator

G408

DC motor/current limit, level/position control, Hi/Lo pressure alarm, power demand 2-channel comparitor

DC Input Field Configurable Limit Alarm

G108

RTD (Types Pt, Ni, Cu)

Temperature control, monitoring and data acquisition

RTD Input Field Configurable Isolator

G418

Heater/cooler control, Hi/Lo temperature alarm, motor temperature monitor

RTD Input Field Configurable Limit Alarm

G118

Thermocouple
(Types E, J, K, R, S, T, B)

Temperature control, monitoring, and data acquisition

Thermocouple Input Field Configurable Isolator

G428

Heater/cooler control, Hi/Lo temperature alarm, motor temperature monitor

Thermocouple Input Field Configurable Limit Alarm

G128

Potentiometer
(0-100 ohm to 0-100K ohm)

Tank level control, monitoring, data acquisition, resistance position sensor conditioning

Potentiometer Input Field Configurable Signal Conditioner

G438

Strain Gauge
(0.5, 1, 3, 5, 10, 20, 50mV/V) 1 to 10V adjustable excitation

Pressure control, pressure status monitoring, weight, load cell conditioning and data acquisition

Bridge Input Field Configurable Isolator

G448

AC Voltage or Current
(V, mV, A, mA)

Voltage/current scaling, power monitoring, isolation, buffering

AC Input Field Configurable Isolator

G468

AC motor/current limit, AC power status monitor

AC Input Field Configurable Limit Alarm

G168

Frequency
(0-2Hz to 0-10KHz)

Flow/velocity control or monitoring, motor speed control, scaling, pulse accumulation, integration totalizing

Frequency Input Field Configurable Isolator

G478

24 Volt DC Power Supplies

Supply 24VDC power to 2, 3, and 4-wire transmitters

24VDC, 1.0A

H910

24VDC, 2.3A

H915

 

Field Configurable Flexibility

Action Instruments has pioneered wide ranging, field configurable instrument design for over 10 years. The Ultra SlimPak Series is a result of this effort and investment. It utilizes the latest ASIC and microprocessor based technologies to provide 1800VDC isolation and wide ranging adjustments for easy, accurate, discrete signal conditioning. The power supply of the Ultra SlimPak will accept any AC or DC source between 9 and 30VDC, typically a 12 or 24VDC supply is used.

The value of a field configurable instrument is that it allows the user to easily set the instrument for their specific or even custom I/O range. This flexibility can reduce spare parts inventory or increase the efficiency of the process by maximizing resolution in critical process measurements.

Ultra High Density

The Ultra SlimPak is developed for high density applications where panel space cannot be wasted. From 17 to 24 Ultra SlimPaks can mount on one linear foot of DIN rail. DIN rail mounting provides easy “snap in place” installation.

Limit Alarms

Limit Alarms are setpoint controllers that regulate industrial processes — discrete, batch or continuous. Two-Position (on/off) controllers simplify processes through automation, and by removing personnel from tedious and possibly harmful environments.

Alarms are indicators of problems — be they production line faults, process upsets, equipment failures or control system abnormalities. Limit Alarms safe guard industrial facilities and workers by alerting and informing process personnel of abnormal conditions

Ultra SlimPak G1X8 Series of Limit Alarms

The Ultra SlimPak G1X8 Series of Limit Alarms accept the most popular process signals: DC voltage and current (G108), RTD (G118), thermocouples (G128) and AC voltage and current (G168). Their output is a dual contact closure (2 - SPDT relays) which can be used to light hazard beacons, sound audible alarms or alert control systems of abnormalities.

Ultra SlimPak G1X8 Series of Limit Alarms

The Ultra SlimPak G1X8 Series of Limit Alarms accept the most popular process signals: DC voltage and current (G108), RTD (G118), thermocouples (G128) and AC voltage and current (G168). Their output is a dual contact closure (2 - SPDT relays) which can be used to light hazard beacons, sound audible alarms or alert control systems of abnormalities.and AC voltage and current (G168). Their output is a dual contact closure (2 - SPDT relays) which can be used to light hazard beacons, sound audible alarms or alert control systems of abnormalities.

Setpoint Flexibility

Wide ranging, field configurable Ultra SlimPaks allow the user to configure the input type, input range, setpoint adjustment, deadband, HI/LO operation, and failsafe or non-failsafe relay state.

These features provide the flexibility required to solve many diverse process control applications with additional benefits such as reduced spare parts inventory and the convenience of an off the shelf solution.

Signal Conditioners

Signal Conditioners amplify and condition weak signals generated by process sensors. They send signals long distances without being degraded by electrical noise. They are also used to drive devices such as indicators, alarms, controllers, computer interfaces and other process instrumentation.

Ultra SlimPak G4X8 Series of Conditioners

The Ultra SlimPak G4X8 Series of Signal Conditioners accept a variety of process signals: DC voltage and current (G408), RTD (G418), thermocouple (G428), potentiometer (G438), strain-gauge (G448), AC current or voltage (G468), frequency/pulse (G478) and AC to 24VDC power (G905). Three port isolation — input to output to power — ensures that common ground faults are eliminated from any source.

ASIC Reliability - Lifetime Warranty

Action Instrument's exclusive analog ASIC increases reliability by reducing components and interconnections up to 70%. Every Ultra SlimPak is backed with a Lifetime Warranty.